SHUTDOWN SYSTEM

You have two possibilities here: Shutdown system and Close application.

Clicking on the Shutdown system icon – shuts down and turns off the workstation, while clicking on the Close application icon allows for closing Reckeen 3D Studio application and going to Windows operating system.

Note: After clicking, a window with a warning appears.

RSS

RSS module is a place where information about news , events, promotions and products is sent by the manufacturer. There are five windows on the start screen. Remember that in order to receive it, it is necessary to have an Internet connection.

CONFIGURATION SETTINGS

Here are five functions available in this option: Language, Style, Update, Free sets and About.

  • Language
    • Clicking on this icon allows you to change the system language.
  • Style
    • Choice of skins Style for the system: White or Black:
  • Update White or Black
    • After clicking on the Update icon, the system searches for software updates.
    • If no new available versions appear in the window, it means the system is fully up-to-date.
  • Free sets
    • The system Reckeen 3D Studio comes with 10 free 3D sets and 10 free Lite sets.
    • After clicking on the button, follow the on-screen instructions. You have to create an account.
  • About
    • When you click on this button the End-User License Agreement (EULA) appears in a separate window along with the current software version number and card’s serial number at the bottom of the window.

Reckeen 3D Studio System Startup

  1. Connect a power cord, a PC keyboard, a mouse and a control panel to the Reckeen 3D Studio workstation.
  2. Connect one, two or three Full HD monitors to the workstation using HDMI, DVI or Display Port on the graphics card. Recommended resolution is 1920×1080 . It is not recommended to connect monitors with different resolutions.
  3. Set the power switch located on the rear panel of the workstation to position 1 – enabled. Open the right door of the front panel and press the button starting the Reckeen 3D Studio system for a couple of seconds. This button is located on the right side of the red reset button.
  4. Important: if you ignore all the messages during the startup process (which can approximately take up to one minute), you will be redirected automatically to the Reckeen 3D Studio Start screen. For more information, see the System Recovery section.
  5. During the first use of the system, the user is obligated to confirm the EULA End-user license agreement. For detailed description go to the About section in CONFIGURATION
  6. There are eight options to choose from on the Start screen (In Version3D + LITE):
    1. 3DPRODUCTION – start the video production in 3D Mode
    2. MICROSOFT PAINT 3D – run Paint 3D Program
    3. LITE PRODUCTION – run Reckeen LITE and start the video production LITE Mode
    4. VSM LITE Editor – start the Reckeen Virtual Space Maker LITE editor
    5. STILL Editor – start the STILL Editor
    6. CONFIGURATION settings – application configuration
    7. RSS – five windows with manufacturer’s information about news, events, promotions, etc.
    8. SHUTDOWN – shuts down the system or close application

The detailed description of each option can be found in the following sections of this manual.

Connections – Reckeen 3D Studio cards’ inputs/outputs

Video Input

Reckeen SDI Virtual Studio System

  • SDI Video Input
    • 2 x SDI – 3G/HD/SD auto switching
  • HDMI
    • 2 x HDMI 1.4 type A connector with support for 1080p60 one up to 4k30p format*

* Reckeen LITE studio offers a Full HD resolution. By purchasing additional License Key, You can upgrade it to 3D Studio &LITE with 4K resolution.

Reckeen HDMI Virtual Studio System

  • HDMI
    • 4 x HDMI 1.4 type A connector with support for 1080p60 two up to 4k30p format*

Video Output

Reckeen SDI Virtual Studio System

  • SDI Video Output
    • 2 x SDI – 3G/HD
  • HDMI
    • 2 x HDMI 1.4 type A connector with support for 1080p60 one up to 4k30p*

* Reckeen LITE studio offers a Full HD resolution. By purchasing additional License Key, You can upgrade it to 3D Studio &LITE with 4K resolution.

Reckeen HDMI Virtual Studio System

  • HDMI
    • 2 x HDMI 1.4 type A connector with support for 1080p60 one up to 4k30p*

Monitor Output

  • 2x DP output for monitor
  • 2x HDMI output for monitor
  • 1x DVI-D output for monitor

CONNECTIONS – REAR PANEL

I/O Port

  • Tally Output
    • TL – DB9 – 4 channels
  • Reckeen External Keyboard port
    • RS – DB9 – RS 232
  • Reckeen External Audio port
    • LAN – Audio Link
  • Ethernet
    • Gigabit Ethernet LAN
  • PC/2
    • PC keyboard
  • USB
    • 2 x USB 3.0 ( front panel )
    • 4 x USB 3.0 ( back panel )
    • 1 x USB 3.1 ( back panel )

Power

Switches power On/Off , 0 – OFF 1 – ON

Power supply cord with a suitable plug will be supplied depending on the user location

CONNECTIONS – FRONT PANEL

Reckeen 3D Studio  System is housed in 19″ 4U Rackmount chassis .

  • Dimensions in mm :  483 (W)x528(D)x177 (H)  ,
  • Dimensions in inches : 19,02″(W)x20,79″(D)x6,97″(H)
  • Weight approx. in kg : 15,5  ,
  • Weight approx. in lb:  34,2

After opening right or left panel doors different elements can be accessed. Access to the front panel doors is secured . This safeguard protects the system from accidental shut down or reset . Below the security lock there are two USB 3.0 ports.

After opening the right door, you will have access to the red Reset button, located next ,the system Start button, and the Audio Panel.

Audio Panel connections

  • Digital
    • embedded stereo on each SDI and HDMI
  • Analog
    • 2 x XLR two channels – professional balanced analogue audio stereo differential input (-10dBV, or 4dBu)
    • 2 x Jack 6,3mm two channels – professional balanced analogue audio stereo differential input (-10dBV, or 4dBu)
    • 1 x MIC Jack 6,3mm – microphone differential input – two types of microphones – dynamic and condenser with + 48V phantom

System Reckeen supports 2 types of microphones. Every type requires different power supply as listed below:

Dynamic

Condenser

  • Reckeen SDI Virtual Studio System
    • Digital
      • embedded stereo on each SDI and HDMI
    • Analog
      • 2 x XLR two channels – professional balanced analogue audio stereo differential output (-10dBV, or 4dBu)
      • 2 x Jack 6,3mm two channels – professional balanced analogue audio stereo differential output (-10dBV, or 4dBu)
      • 1 x Jack 6,3mm – stereo Headphone output
  • Reckeen HDMI Virtual Studio System
    • Digital
      • embedded stereo on each HDMI
    • Analog
      • 2 x XLR two channels – professional balanced analogue audio stereo differential input (-10dBV, or 4dBu)
      • 2 x Jack 6,3mm two channels – professional balanced analogue audio stereo differential input (-10dBV, or 4dBu)
      • 1 x Jack 6,3mm – stereo Headphone output

It is recommended that the workstation is placed in such a way that permits the airflow to the front and the rear panel. Fans for proper system cooling are mounted behind the left door’s panel and in the rear of chassis . Slots and openings in the back of the workstation casing are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating. The workstation casing is suitable for installation in server racks, taking up space of 4U.

SYSTEM REQUIREMENTS

System Reckeen requires a minimum of one PC monitor in Full HD resolution (up to 3 Full HD monitors connected to the chosen graphic card ports), Camera with SDI or HDMI output – 4 pcs ( 4 pcs HDMI Cameras or 2 pcs HDMI and 2 pcs SDI Cameras depending on the chosen version of system inputs) , a PC keyboard – 1 pc. and a mouse – 1 pc. Cables for video signal connetions: 4xSDI or 2xSdi and 2xHDMI depending on version. In addition, it is possible to connect another 4th monitor for preview.