CONNECTIONS – FRONT PANEL

Reckeen 3D Studio  System is housed in 19″ 4U Rackmount chassis .

  • Dimensions in mm :  483 (W)x528(D)x177 (H)  ,
  • Dimensions in inches : 19,02″(W)x20,79″(D)x6,97″(H)
  • Weight approx. in kg : 15,5  ,
  • Weight approx. in lb:  34,2

After opening right or left panel doors different elements can be accessed. Access to the front panel doors is secured . This safeguard protects the system from accidental shut down or reset . Below the security lock there are two USB 3.0 ports.

After opening the right door, you will have access to the red Reset button, located next ,the system Start button, and the Audio Panel.

Audio Panel connections

  • Digital
    • embedded stereo on each SDI and HDMI
  • Analog
    • 2 x XLR two channels – professional balanced analogue audio stereo differential input (-10dBV, or 4dBu)
    • 2 x Jack 6,3mm two channels – professional balanced analogue audio stereo differential input (-10dBV, or 4dBu)
    • 1 x MIC Jack 6,3mm – microphone differential input – two types of microphones – dynamic and condenser with + 48V phantom

System Reckeen supports 2 types of microphones. Every type requires different power supply as listed below:

Dynamic

Condenser

  • Reckeen SDI Virtual Studio System
    • Digital
      • embedded stereo on each SDI and HDMI
    • Analog
      • 2 x XLR two channels – professional balanced analogue audio stereo differential output (-10dBV, or 4dBu)
      • 2 x Jack 6,3mm two channels – professional balanced analogue audio stereo differential output (-10dBV, or 4dBu)
      • 1 x Jack 6,3mm – stereo Headphone output
  • Reckeen HDMI Virtual Studio System
    • Digital
      • embedded stereo on each HDMI
    • Analog
      • 2 x XLR two channels – professional balanced analogue audio stereo differential input (-10dBV, or 4dBu)
      • 2 x Jack 6,3mm two channels – professional balanced analogue audio stereo differential input (-10dBV, or 4dBu)
      • 1 x Jack 6,3mm – stereo Headphone output

It is recommended that the workstation is placed in such a way that permits the airflow to the front and the rear panel. Fans for proper system cooling are mounted behind the left door’s panel and in the rear of chassis . Slots and openings in the back of the workstation casing are provided for ventilation, to ensure reliable operation of the equipment and to protect it from overheating. The workstation casing is suitable for installation in server racks, taking up space of 4U.