MVP-100 is an advanced video converter which allows conversion of UHD input signals into 4 different streams with resolution up to FullHD. Each device has two UHD inputs which are working simultaneously.
MVP-100 is an advanced video converter which allows conversion of UHD input signals into 4 different streams with resolution up to FullHD. Each device has two UHD inputs which are working simultaneously.
Each channel has four rectangles definition of the way how input signal is divided into 4 different outputs. Is it done by drawing 4 different windows 1,2,3 and 4. Content bordered by every window will be send to corresponded output.
HDMI 2.0 or 2x SDI 12G, every single 4k input can be replaced by 4 x 3G SDI input. (QUAD)
We support 8 SDI input with 3G format. Every 4 x 3G SDI input can be replaced by single 4k input.
You can selected form 8 SDI input up to 2 as HDMI with supports up to 4k format.
Tgger in MVP-100, that is windows’ motion control (a virtual camera). You can program up to 8 windows, each with a different type of motion (single, loop, ping-pong, zoom etc.).
Communications port for controlling Reckeen External Control Panel MVPkey 100 with Joystick and T-bar.
We will support 1080i, 1080p, 2160p and 50 or 60Fps as well, with auto detect functions.
You can mix 4k input with 4 x 3G SDI input.
High quality 4k scaler on each of the 4k inputs.
High quality Full HD scalers on each of the Full HD inputs.
Embedded stereo on each SDI and HDMI input.
Gigabit Ethernet LAN , for update firmware’s or communications with the MVP100 devices.
Input key and Fill
Allows you to set the colour on the input.
Grab or download still via LAN.
The LEDs’ colors indicating current signal format on inputs.
Embedded stereo on each SDI and HDMI output.
8 channels Tally Output
Any one can be set as PGM, PVW or AUX and Clean Feed
One is MultiViewer, the second HDMI is always PGM
There are 3 layouts, predefined without config.
OSD menu to board configurations on MV output.
The intermingling of audio sources at the video transition.
GPIO (General Purpose Input/Output) is an interface used for communication between MVP-100 system components and various peripheral devices. An external device can activate a trigger in MVP-100.
Support T-Bar/Auto – effects as dissolve, effects from list selected from menu.
Fade to black effect.
It allows the device’s configuration and saving presets in the device’s internal memory.
Luminance and chrominance key.
External port to control MVP devices via commends.
Reckeen external audio port RJ45.
Allows the specification of the reference signal for output channels synchronization.
Area in a Rack type housing 1U+